Baby Lock ellageo BLL Instruction And Reference Manual page 145

SEWING AN EMBROIDERING PATTERN
c
After sewing is finished, remove the appliqué
fabric from the embroidery frame, and then
carefully cut along the stitching.
Note
Carefully cut out the appliqué along the outline that
was sewn. If the appliqué is cut out along the inside of
the outline, the appliqué fabric may not be caught by
the stitching. If this step is not performed correctly, the
appliqué will not be sewn correctly. In addition,
carefully remove any excess threads.
d
Hoop the base fabric in the embroidery
frame.
a Base fabric
e
Press the "Start/Stop" button to sew the
position of the appliqué.
* Use the same color of thread to be used to attach the
appliqué.
a Appliqué position
b Base fabric
→ The machine sews around the position of the
appliqué, then stops.
144
a
a
b
f
Apply a thin layer of adhesive or spray
adhesive to the back of the appliqué piece,
and then attach it to the base fabric at the
appliqué position sewn in step
Note
If the appliqué fabric is a lightweight fabric, you may
want to use a fusible web to stabilize the fabric and to
attach it to the base fabric. Do not remove the base
fabric from the embroidery frame when ironing on the
appliqué piece.
g
After the appliqué piece is attached, press the
"Start/Stop" button to sew the appliqué.
→ The appliqué is then completed.
Memo
Depending on the pattern that is selected, "APPLIQUÉ"
may not appear, but instead will appear as a color. If
"APPLIQUÉ" appears as a color, embroider using
thread of that color.
h
Change the upper thread, and then finish
embroidering the remainder of the pattern.
Note
• If glue is attached to the presser foot, needle or
needle plate, finish embroidering the appliqué
pattern, and then clean off the glue.
• For best results, trim all excess threads between
pattern parts.
e
.