Advertisement
Figure 1 The CIPHER Front Panel
Front Panel
11 Enter
TRANSPORT
4 Pause
and Remote
Temporarily suspends
playback of a track.
12 Directional Arrows
To resume playback at
POWER
the point pause was
1 Power
engaged, press play.
Switches the CIPHER
5 Stop
between stand-by and
13 Title
Stops disc playback.
operational modes.
6 Play
2 Stand-by and Power
Starts playback from the
LED
beginning of the disc.
Stand-by. The red
7 Open/Close Button
stand-by LED illumi-
Opens and closes the
nates when the CIPHER
disc transport.
is switched on from the
8 Track Forward and
back panel, indicating
that the player is in the
Back
stand-by mode and
Track Forward. Selects
ready to be switched to
the track that follows the
the operational mode.
current track.
Track Back. Selects the
Power. The blue power
track that precedes the
LED illuminates when
14 Prog
current track.
the CIPHER is in the
Search. Press repeated-
operational mode.
ly (do not hold) to skip
3 Infrared Sensor
multiple tracks.
Receives commands
9 Search Forward and
from the CIPHER remote
Back
control. For proper
Press to scroll forward or
remote control operation,
backward in the current
do not obstruct the
track. Press play (6) to re-
infrared sensor.
turn to normal playback.
10 Menu
Access 5 menu choices:
1) Info, 2) Disc Text, 3)
SACD Default, 4) System
Info, and 5) SPDIF con-
trol options.
2
Krell CIPHER
This product is manufactured in the United States of America. Krell
by Krell Industries, LLC. its subsidiaries, and authorized agents. TosLink
trade names are registered to their respective companies.
© 2011 by Krell Industries, LLC., All rights reserved
15 Clear
20 Dim
Press to select one of
Press to delete an un-
Reduces the illumination
the 4 menu choices list-
wanted entry in a pro-
of the front panel display
ed above (10).
gram sequence.
(19).
16 Direct Track Access
21 Display
Press the up or down
Use buttons or keys
Cycles the front panel
arrows to navigate the 3
1 through 9 to access
display between 4
menu choices.
each track in a disc
choices: remaining track
directly.
time, elapsed track time,
If tracks consist of 2
elapsed time on the
Selects the format:
digits, press the buttons
disc, and remaining disc
conventional CD (
),
CD
or keys within 2 sec-
time.
two-channel SACD
onds of each other.
(
), or multi-
SACD Stereo
REMOTE ONLY
channel SACD
17 Filter
(SACD
22 Repeat
). The default format
Selects filter responses
Multi
Replays selected track
is
The current-
for disc formats.
SACD Multi.
or entire disc until new
ly selected format
1 - 4 for SACD
appears in the front
1 - 2 for CD
feature is selected.
panel display (19) imme-
23 Repeat A/B
18 Disc Transport
diately after being
Loop between 2 prede-
Holds the disc.
selected. Each format is
termined points within
selectable in the menu.
a single track or sequen-
DISPLAY
tial tracks.
19 Front Panel Display
Press
to begin pro-
PROG
24 Audio
Shows disc type and
gramming a sequence
Cycles between the
format, and the current
of tracks. If a disc is
stereo and multi-channel
status of the disc. The
playing, press
(5)
STOP
layers of a SACD disc.
phrase
CHANGING LAYER
and then press
PROG.
appears in the front
To set up a program.
INACTIVE
panel display while the
Press
(14) then
PROG
disc moves between
Front Panel.
enter a track number
conventional CD and
DISC
and press
(11).
ENTER
SACD layers.
Repeat until all desired
Remote.
tracks are entered.
SETUP ,
Press
(6) to begin
PLAY
inactive.
the program.
To exit the program
mode. Open the trans-
port (18) or press
STOP
(5) and then press
PROG
(14) twice.
®
is a registered trademark of Krell Industries, LLC., and is restricted for use
®
is a trademark of Toshiba Corporation. All other trademarks and
Figure 2 The CIPHER Back Panel
Back Panel
Figure 3 The CIPHER Remote
and
SETUP
buttons are inactive.
SUBT, ANGLE, RET,
and
keys are
DISC
ANALOG AUDIO
DIGITAL AUDIO
OUTPUTS
OUTPUTS
34 Back Panel Power
25 L and R Balanced
29 Optics Output
Analog Audio Outputs
One EIAJ fiber optical
One pair of balanced
digital output with a
outputs with XLR con-
TosLink connector.
nectors.
30 Coax Output
35 IEC Connector
26 Multi-channel Single-
One S/PDIF coaxial digi-
ended Analog Audio
tal output with an RCA
Outputs
connector.
For connection to a
BACK PANEL REMOTE
multi-channel receiver,
CONNECTIONS
with RCA connectors:
31 12 VDC In/Out
L, R = left and right
(12 V Trigger)
channel connections.
IMPORTANT
Out. Activates a 12 VDC
C = center channel
Do not attach enhance-
signal when the player is
connection.
ment accessories such as
in the operational mode
SW= subwoofer
that may be used to turn
rings, mats, or dampers
connection.
on other devices
to individual discs. These
SL, SR = left and right
equipped with a 12V trig-
accessories may interfere
surround channel
ger input.
with the disc transport,
connections.
In.Sets the player in the
resulting in erratic play-
27 CANLink
operational mode when
back and/or poor sound.
Each CIPHER has two
a 12 VDC signal is
RJ-45 link connectors,
applied to this connec-
Note
connected in parallel.
tion.
These connectors are
The CIPHER incorporates
32 RS-232
used to operate the
an advanced suspension
The RS-232 communica-
CIPHER in link mode,
tion port allows you to
system and does not
with other Evolution
send and receive opera-
require additional mass
products.
tional instructions to and
coupling or isolation. You
28 CAST Audio Outputs
from the CIPHER via an
may experiment with feet or
One pair of CAST out-
external computer con-
cones as long as they are
puts with 4-pin bayonet
trol system.
not permanently affixed to
connectors, for use with
33 RC-5 In
the unit. Any unauthorized
Krell CAST-equipped
Accepts baseband RC-5
modifications to the unit or
preamplifiers.
input commands from
electronics voids the war-
hardwired remote con-
ranty.
trollers.
POWER
Switch
Use this switch to
change the CIPHER
from off to stand-by.
Use the provided IEC
standard 15 amp power
cord. The switch should
remain unobstructed for
ease of operation and in
case of an emergency.
Krell CIPHER
3
Advertisement
