Engine Oil Change - Honda EB3000c Owner's Manual

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the oil, then
remove the oil drain plug and sealing washer, remove the oil filler
cap, and drain the oil.
2. Reinstall the oil drain plug and sealing washer. Tighten the plug
securely.
3. Refill with the recommended oil
(see page 27
level.
4. Reinstall the oil filler cap and
tighten it securely.
Wash your hands with soap and
water after handling used oil.
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of it properly. Put it in a
sealed container, and take it to a recycling center. Do not discard it in a
trash bin or dump it on the ground.
38
OIL FILLER CAP
) and check the oil
CANISTER
OIL DRAIN PLUG
(California TYPE)
SEALING
WASHER
UPPER LIMIT