Basic Remote Control Operation - AWA LT20D User Manual

Basic Remote Control Operation

1. Source Button
Select input source.
2. Multi Button
It is converted with Digtal Source.
3. PC Button
Select PC signal.
4. Language Button
Language Selection.
5. Picture Button
You can sequentially select and adjust one of five picture levels.
6. Sleep Button
The television is automatically turned off after an elapse of the set sleep time.
1) The set time ranges from 15 to 90 minutes, which is repeated in sequence each time
you press.
OFF 10 30
2) If you'd like to check the remaining SLEEP TIME after OSD disappears, press DIS-
PLAY button.
7. Menu Button
It displays all the functions that user can control.
8. M/S Button
Sound Selection.
""
60 90 120 150 180
Basic Remote Control Operation
9. Tow digit Button
1) -/-- key selects one-digit (0 to 9) or two-digit program number (10 to 99)
2) (-) or (--) is displayed by turns on the upper right position if you press this
key repeatedly.
3) You can choose one-digit program number if (-) is shown and two-digit program
number if(--) shewn.
ex1) Press 7 if you'd like watch program number 7.
ex2) Press -/-- 1 7 if you'd like to watch program number 17.
* If you want to watch progrma number 7 while (--) is alread on, press -/--
10. Numeric Buttons
Direct Channel select.
11. Teletext Buttons
See the teletext section for details.
12. Power Button
Turns the TV the TV on and OFF.
13. Auto ADJ Button
Auto adjusting the screen in PC mode.
14. Mute Button
Switch the sound output either ON or OFF.
15. WIDE Button
This button is not available.
7 or 0 7.
"%