Behringer Europower PMP6000 Manual page 4

EUROPOWER
PMP6000
PMP4000
PMP1680S
MON knob
adjusts amount
of channel's signal
sent to MONITOR
output jack and/
or OUTPUT A
when driving
passive monitors
FX 1 & 2 knobs
adjust amount
of signal sent to
respective
multi-FX
processors
PAN knob
positions
channel in
stereo field
LEVEL knob
adjusts channel
volume
FX RET 1 & 2 knobs
adjust amount
of signal from
internal multi-FX
processor in main
or monitor mix
Small, Simple, Superb
Medium-sized events call for a
lightweight (PMP6000: 13.1 kg/28.9 lbs;
PMP4000: 0.4 kg/22.9 lbs; PMP1680S:
9.9 kg/28.8 lbs), easy-to-use
powered mixer. BEHRINGER powered
mixers are the most efficient,
MULTI-FX
Processor adds
EQ knobs adjust selected sound
high, mid and effect to channels
low frequencies whose FX knob is
of channel turned up
GRAPHIC CD/TAPE IN
EQ adjusts knobs adjust
specific volume
frequencies of CD/TAPE IN
signal in main
or monitor mix
affordable mixers for the job, and are even
suitable for use as pure analog mixers
or as pure power amplfiers. With new
technological advantages and incredible
built-in features, it's easier than ever to
lend exceptional sound quality to all kinds
of public performances.
METERS
PHANTOM switch
display main
provides 48V to
the XLR inputs and monitor
output
for use with
condenser mics signal levels
MAIN MASTER MONITOR MASTER
knob adjusts knob adjusts
output of main output of monitor
signal signal and OUTPUT
A when using
MON/MONO mode
Page 4 of 8
POWER AMP
switch selects
operating mode
of power amp
SPEAKER PROCESSING
switch allows mixer to
compensate for speakers
with limited low end
frequency response
STANDBY
button
mutes all
input channels
except CD/TAPE
inputs
ON/OFF
button