Table of Contents
Advertisement
Setting up your TV
To connect a cable converter box:
1 Connect a 75 ohm coaxial cable from the cable TV wall outlet to the antenna input jack
Incoming cable
2 Connect a 75 ohm coaxial cable from the antenna out jack on the back of the converter
To connect cable with both scrambled and unscrambled signals:
1 Connect a 75 ohm coaxial cable to a signal splitter (not included).
2 Connect a 75 ohm cable from the signal splitter to the converter box and another
75 ohm coaxial cable
from antenna, cable
wall outlet, or
descrambler box
3 Connect a 75 ohm cable from the antenna out jack on the converter box to the A
4 Connect a 75 ohm cable from the output jack on the A/B switch to the antenna in jack
5 Use the A/B switch to switch the signal from scrambled to unscrambled.
on the back of the converter box.
box to the antenna input jack on the back of your TV.
75 ohm cable to the B connector on an A/B switch (not included).
Signal splitter
connector on the A/B switch.
on the back of your TV.
Converter box
Converter box
A/B switch
Antenna input jack
Antenna input jack
15
Advertisement
Table of Contents
