Channel Interleaving; Rank Interleaving - Gigabyte GA-P55A-UD7 User Manual

 Advanced Memory Settings
Extreme Memory Profile (X.M.P.)
System Memory Multiplier
Memory Frequency (Mhz)
Performance Enhance
DRAM Timing Selectable
Profile DDR Voltage
Profile QPI Voltage
x Channel Interleaving
x Rank Interleaving
>>>>> Channel A
 Channel A Timing Settings
>>>>> Channel B
 Channel B Timing Settings
higf : Move Enter: Select
F5: Previous Values
Extreme Memory Profile (X.M.P.)
Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the MB In-
telligent Tweaker(M.I.T.) main menu.
Performance Enhance
Allows the system to operate at three different performance levels.
Standard
Turbo
Extreme
DRAM Timing Selectable (SPD)
Quick and Expert allows the Channel Interleaving and Rank Interleaving items and the timing set-
tings below to be configurable. Options are: Auto (default), Quick, Expert.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this
item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2, this
item will display the value based on the SPD data on the XMP memory.
Profile QPI Voltage
The value displayed here is dependent on the CPU being used.

Channel Interleaving

Options are: Auto (default), 1~6.

Rank Interleaving

Options are: Auto (default), 1~4.
(Note) This item appears only if you install a memory module that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Memory Settings
(Note)
(SPD)
1333
(SPD)
6
4
+/-/PU/PD: Value
F6: Fail-Safe Defaults
(Note)
Lets the system operate at its basic performance level.
Lets the system operate at its good performance level. (Default)
Lets the system operate at its best performance level.
[Disabled]
[Auto]
1333
[Turbo]
[Auto]
1.5V
1.15V
Auto
Auto
[Press Enter]
[Press Enter]
F10: Save
, System Memory Multiplier (SPD), Memory
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup