Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 275
Release 6.1
Hide thumbs
Also See for MERLIN LEGEND Release 6.1:
- Feature reference (1021 pages) ,
- System programming manual (1010 pages) ,
- Maintenance and troubleshooting manual (510 pages)
Table of Contents
Advertisement
MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
5
Data Communications
Digital Data/Video Stations
4.
In the Digital Facilities space, enter the method used to access incoming
and outgoing facilities.
a.
b.
In the Digital Facilities In space, enter one of the following for
incoming data/video calls:
1.
If personal lines are used to receive data/video calls, enter
the line/trunk number for each personal line. For example,
801/802.
2.
If Dial Plan Routing is used to route incoming data/video calls
(PRI and T1 Switched 56 facilities only), enter Dial Plan
Routing.
3.
If Tie Line Routing is used to route incoming data/video calls
(PRI and T1 Switched 56 facilities only), enter Tie Line
Routing.
In the Digital Facilities Out space, enter one of the following for
outgoing data/video calls:
1.
If personal lines are used to place outgoing data/video calls,
enter the line/trunk number for each personal line. For
example, 801/802.
2.
If Pool Access is used to place outgoing data/video calls,
enter the pool access number. For example, 890.
3.
If Automatic Route Selection (ARS) is used to place outgoing
data/video calls, enter the ARS access code. The ARS
access code factory setting is 9.
Issue 1
August 1998
Page 5-43
Advertisement
Table of Contents
