Table of Contents
Advertisement
EUP Support (Enabled)
When enabled, system can not resume by some devices (PCI/PCIE/PME/Ring/RTC,
etc) at S5 state. You can use this item to save power.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Init Display First
: Move
Enter : Select
F1:General Help
Init Display First
(PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
PCI
PCI Express
PCI
+/-/: Value
F10: Save
ESC: Exit
F9: Optimized Defaults
Using BIOS
35
Help Item
Options
Advertisement
Table of Contents
