Power Management Setup - ECS A890GXM-A2 Manual

32

Power Management Setup

This page sets up some parameters for system power management operation.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
ACPI Suspend Type
PWRON After PWR-Fail
Resume By PCI/PCI-E/Lan PME
Resume By USB (S3)
EUP Support
ACPI Suspend Type (S3)
Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory.
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its operating
status.
Resume By PCI/PCI-E/Lan PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.
Resume By USB (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Note: *USB3.0 connector does not support wake-up function.
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
Press <Esc> to return to the main menu setting page.
Power Management Setup
S3
Power Off
Disabled
Disabled
Enabled
: Move Enter : Select +/-/: Value F10: Save
F9: Optimized Defaults
F1:General Help
Using BIOS
Help Item
Select the ACPI
state used for
System Suspend.
ESC: Exit