Table of Contents
Advertisement
REPLAY Series
Using DAB+ Radio
Turning the Unit On
1.
Connect the Power Adaptor to the DC socket on the back of the unit. Then insert the Power Adaptor into the
desired wall outlet.
2.
Press the
Button to turn on the unit, and then carefully extend antenna.
Note: you may want turn off the unit, it simply needs you press the
3.
When you turn on your DAB+ Radio for the first time it will conduct a full station scan and stored all the DAB+
available Radio Stations.
4.
The full scan may take 1-2 minutes to complete and store all stations it detected.
Note: a. The DAB+ stations will be displayed in alphanumeric order. The first station in the list will be played after scan.
b. If no DAB+ signal is found in your area, it may be necessary for you to relocate your radio.
Displaying Signal Strength
1. Press the INFO Button during a DAB+ program available, the LCD screen will display a signal bar to show the
signal strength of this program.
Button again.
The indicator on the signal bar shows the minimum acceptable
signal level.
Note: Stations with signal strength below the minimum signal level
will not provide a steady stream of audio.
8
Hide quick links:
Advertisement
Table of Contents
