Gigabyte GA-P55-USB3 User Manual page 104

• Restoring the Master Drive to a Previous State (for Recovery Volume only)
When two hard drives are set to Recovery Volume in Update on Request mode, you can restore the master
drive data to the last backup state when needed. For example, in case the master drive detects a virus, you
can restore the recovery drive data to the master drive.
Step 1:
Select 4. Recovery Volume Options in the MAIN MENU of the RAID Configuration Utility. On the RECOV-
ERY OPTIONS menu, select Enable Only Recovery Disk to show the recovery drive in the operating sys-
tem. Follow the on-screen instructions to complete and exit the RAID Configuration Utility.
Name
Volume0

Step 2:
Go to the Manage menu of the Intel Rapid Stor-
age Technology utility and click Recover data in
Manage Volume.
The Status item on the left of the screen dis-
plays the rebuild progress.
Appendix
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Intel Corporation. All Rights Reversed.
[ RECOVERY VOLUME OPTIONS ]
1. Enable Only Recovery Disk
2. Enable Only Master Disk
[ SELECT RECOVERY VOLUME
Level
Recovery(OnReq)
RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
Select a Recovery volume to do the operation.
Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror.
RAID5: Stripes data and parity.
[ hi ]-Up/Down [SPACE]-Selects [ENTER]-Done
[ hi ]-select
[ HELP ]
Capacity
111.7GB
Choose the RAID level:
[ESC]-Previous Menu
Step 3:
Click Yes to begin the data recovery.
Step 4:
After the recovery volume is completed, the Sta-
tus will display as Normal.
- 104 -
]
Status Bootable
NeedsUpdate Yes
[ENTER]-Select