Standard Cmos Features - Gigabyte GA-P55-USB3L User Manual

2-4

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 2 Master
 IDE Channel 3 Master
 IDE Channel 4 Master
 IDE Channel 4 Slave
 IDE Channel 5 Master
 IDE Channel 5 Slave
Drive A
Halt On
Base Memory
higf : Move Enter: Select
F5: Previous Values
Extended Memory
Total Memory
higf : Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
• None
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
If no IDE/SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Tue, Dec 15 2009
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[All, But Keyboard]
640K
F10: Save
1022M
1024M
F10: Save
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup