Startup Screen - Gigabyte GA-EG41MF-US2H User Manual

2-1

Startup Screen

The following screens may appear when the computer boots.
Motherboard Model
BIOS Version
Function Keys:
<DEL>: BIOS Setup
Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
<F9>: XpressRecovery2
If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the
<F9> key can be used for subsequent access to Xpress Recovery2 during the POST. For more
information, refer to Chapter 4, "Xpress Recovery2."
<F12>: Boot Menu
Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use
the up arrow key <
<Enter> to accept. To exit Boot Menu, press <Esc>. The system will directly boot from the device
configured in Boot Menu.
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot
order will still be based on BIOS Setup settings. You can access Boot Menu again to change the first
boot device setting as needed.
<End>: Qflash
Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first.
GA-EG41MF-US2H Motherboard
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2009, Award Software, Inc.
EG41MF-US2H F1a
.
.
.
.
<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash
03/09/2009-G41-ICH7-7A69PG0JC-00
> or the down arrow key < > to select the first boot device, then press
- 3 4 -
Function Keys