Gigabyte GA-EG41MF-US2H User Manual page 11

Internal Connectors
Back Panel
Connectors
I/O Controller
Hardware Monitor
1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

1 x floppy disk drive connector

1 x IDE connector

4 x SATA 3Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

1 x CD In connector

1 x S/PDIF In header

1 x S/PDIF Out header

2 x USB 2.0/1.1 headers

1 x IEEE 1394a header

1 x serial port header

1 x power LED header

1 x chassis intrusion header

1 x clearing CMOS jumper

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x D-Sub port

1 x DVI-D port
 (Note 3) (Note 4)
 1 x HDMI port
(Note 4)
 1 x optical S/PDIF Out connector
4 x USB 2.0/1.1 ports

 1 x IEEE 1394a port
1 x RJ-45 port

6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side

Speaker Out/Line In/Line Out/Microphone)
iTE IT8718 chip

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan fail warning

CPU/System fan speed control
 (Note 5)
- 11 - Hardware Installation