Advanced Bios Features - Gigabyte GA-H67A-UD3H User Manual

2-5

Advanced BIOS Features

 Hard Disk Boot Priority
Quick Boot
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Limit CPUID Max. to 3
No-Execute Memory Protect
Delay For HDD (Secs)
Full Screen LOGO Show
Init Display First
Onboard VGA
On-Chip Frame Buffer Size
higf : Move Enter: Select
F5: Previous Values
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
Quick Boot
Enables or disables the quick boot function to speed up the system boot-up process to shorten the wait-
ing time for entering the operating system and to deliver greater efficiency for daily use. The settings
here synchronize with the settings of the SMART QuickBoot of Smart 6
First/Second/Third Boot Device
Specifies the boot order from the available devices. Use the up or down arrow key to select a device and
press <Enter> to accept. Options are: Hard Disk, CDROM, USB-FDD, USB-ZIP, USB-CDROM, USB-
HDD, Legacy LAN, Disabled.
Password Check
Specifies whether a password is required every time the system boots, or only when you enter BIOS
Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in
the BIOS Main Menu.
Setup
System
HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings
when a third party hardware monitor utility is installed. (Default: Disabled)
(Note) This item is present only when you install a CPU that supports this feature. For more information
about Intel CPUs' unique features, please visit Intel's website.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced BIOS Features
(Note)
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
A password is only required for entering the BIOS Setup program. (Default)
A password is required for booting the system and for entering the BIOS Setup
program.
[Press Enter]
[Disabled]
[Hard Disk]
[CDROM]
[USB-FDD]
[Setup]
[Disabled]
[Disabled]
[Enabled]
[0]
[Enabled]
[PCI]
[Enable If No Ext PEG]
[64MB+2MB for GTT]
F10: Save
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
. (Default: Disabled)
™
BIOS Setup