Gigabyte GA-H67A-UD3H User Manual page 11

Storage Interface 
USB
IEEE 1394
Internal
Connectors

Back Panel
Connectors
Chipset:
- 2 x SATA 6Gb/s connectors (SATA3_0~SATA3_1) supporting up to 2 SATA
6Gb/s devices
- 3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA
3Gb/s devices
- 1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA
3Gb/s device
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the
system performance of the RAID set may vary depending on the devices being
connected.
Chipset:

- Up to 14 USB 2.0/1.1 ports (4 on the back panel, 10 via the USB brackets
connected to the internal USB headers)
Renesas D720200 chip:

- Up to 2 USB 3.0/2.0 ports on the back panel
T.I. TSB43AB23 chip:

- Up to 3 IEEE 1394a ports (1 on the back panel, 2 via the IEEE 1394a
brackets connected to the internal IEEE 1394a headers)
1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

3 x SATA 3Gb/s connectors

2 x SATA 6Gb/s connectors
1 x CPU fan header

2 x system fan headers

1 x power fan header

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

5 x USB 2.0/1.1 headers

2 x IEEE 1394a headers

1 x serial port header

1 x clearing CMOS jumper

1 x PS/2 keyboard/mouse port

1 x D-Sub port

1 x DVI-D port

1 x optical S/PDIF Out connector

1 x HDMI port

1 x DisplayPort

4 x USB 2.0/1.1 ports

2 x USB 3.0/2.0 ports

1 x IEEE 1394a port

1 x eSATA 3Gb/s connector

1 x RJ-45 port

6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/

Side Speaker Out/Line In/Line Out/Microphone)
- 11 - Hardware Installation