Removing A Memory Upgrade Module - Fujitsu LifeBook NH751 User Manual

Hide thumbs Also See for LifeBook NH751:
Table of Contents

Advertisement

Available languages

Available languages

T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU SHOULD ROUTINELY REMOVE FROM YOUR
NOTEBOOK
SYSTEM MEMORY CAPACITY

Removing a Memory Upgrade Module

1
Perform steps 1 through 5 of Installing a
Memory Upgrade Module.
2
Pull the clips sideways away from each
side of the memory upgrade module at
the same time.
3
While holding the clips out, remove the
module from the slot by lifting it up and
pulling towards the rear of your
LIFEBOOK notebook. (Figure 39)
4
Store the memory upgrade module in a
static guarded sleeve.
5
Replace the cover by following steps 9
and 10 of Installing a Memory Upgrade
Module.
A
FTER INSTALLING YOUR ADDED MEMORY MODULE
IN ORDER FOR THE
S
"H
EE
IBERNATION
. O
,
NCE IT IS INSTALLED
YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO INCREASE
.
S
-
-D
AVE
TO
ISK MODE TO OPERATE PROPERLY ON YOUR
(S
-
-D
) F
AVE
TO
ISK
69 - Memory Upgrade Module
Figure 39. Removing a Memory Upgrade Module
,
YOU MUST RESET THE POWER PLAN PARAMETERS
"
45.
EATURE
ON PAGE
LIFEBOOK
.
NOTEBOOK

Advertisement

Chapters

Table of Contents
loading

Table of Contents