Removing A Memory Upgrade Module; Checking The Memory Capacity - Fujitsu LIFEBOOK S762 User Manual

T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY

Removing a Memory Upgrade Module

Perform steps 1 through 5 of Installing a Memory Upgrade Module.
1
Pull the clips sideways away from each side of the memory upgrade module at the same time.
2
While holding the clips out, remove the module from the slot by lifting it and pulling it away from your notebook.
3
Store the memory upgrade module in a static guarded sleeve.
4
Replace the cover and reinstall the screws.
5

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
Check the memory capacity by doing the following: from Modern Start screen press [Windows]+[X], then select
Control Panel > System. The amount of memory is displayed next to Installed Memory (RAM): The amount of
memory displayed should be approximately the total of all memory modules installed. There may be a discrepancy
which is allocated for fixed video memory.
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED
.
,
CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED
,
SEE
75 - Memory Upgrade Module
. O
NCE IT IS INSTALLED
.
T 85
ROUBLESHOOTING ON PAGE
,
YOU SHOULD LEAVE IT
. (I
F THE MODULE IS