Checking The Memory Capacity; Removing A Memory Upgrade Module - Fujitsu LIFEBOOK NH532 User Manual

Hide thumbs Also See for LIFEBOOK NH532:
Table of Contents

Advertisement

Available languages

Available languages

Removing a Memory Upgrade Module

Perform steps 1 through 5 of Installing a Memory
1
Upgrade Module.
Pull the clips sideways away from each side of the
2
memory upgrade module at the same time.
While holding the clips out, remove the module
3
from the slot by lifting it up and pulling towards
the rear of your LIFEBOOK notebook. (Figure 39)
Store the memory upgrade module in a static
4
guarded sleeve.
Replace the cover by following step 8 of Installing
5
a Memory Upgrade Module.
A
FTER INSTALLING YOUR ADDED MEMORY MODULE
OPERATE PROPERLY ON YOUR

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
,
YOU MUST RESET THE POWER PLAN PARAMETERS IN ORDER FOR THE
S
"H
LIFEBOOK
.
EE
IBERNATION
NOTEBOOK
67 - Memory Upgrade Module
Memory Clip
Figure 39. Removing a Memory Upgrade Module
(S
-
-D
) F
AVE
TO
ISK
EATURE
Memory Clip
S
-
-D
AVE
TO
ISK MODE TO
"
41.
ON PAGE

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents