Loading Cutlery And Dishes - Electrolux ESF 63012 User Manual

8 electrolux
4. If you use the detergent tablets, put the
tablet in the detergent dispenser
5. Close the detergent dispenser. Press
the lid until it locks into position.
Different brands of detergent dissolve
in different times. Some detergent tab-
lets do not have the best cleaning re-
sults during short washing pro-
grammes. Use long washing pro-
grammes when you use the detergent
tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.
Do these steps to fill the rinse aid dispens-
er:
1. Press the release button
7
lid of the rinse aid dispenser.
2. Fill the rinse aid dispenser
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing programme.
4. Close the rinse aid dispenser. Press the
lid until it locks into position.
Adjust the rinse aid dosage
Factory set: position 4.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 6
(highest dosage).

LOADING CUTLERY AND DISHES

Hints and tips
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that water does not collect in
containers or in bowls.
Turn the rinse aid selector
3
. decrease the dosage.
Using combi detergent tablets
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
rinse aid dispenser. The rinse aid indicator
stays on when the appliance is activated.
Be sure that these tablets are applicable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
1. Adjust the water hardness to the lowest
2. Set the rinse aid dosage to the lowest
Using again separately detergent, salt
and rinse aid
5
to open the
1. Fill the salt container and the rinse aid
4
with rinse
2. Adjust the water hardness to the highest
3. Start a washing programme without
4. When the washing programme is com-
5. Adjust the quantity of rinse aid.
• Make sure that cutlery and dishes do not
• Make sure that the glasses do not touch
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to pre-
• When you put the items in the baskets,
• Put light items in the upper basket. Make
• Water droplets can collect on plastic
level. Refer to 'Setting the water soften-
er'.
position.
dispenser.
level.
dishes.
pleted, adjust the water softener to the
water hardness in your area.
bond together.
other glasses.
vent them to bond together.
make sure that the water can touch all
surfaces.
sure that the items do not move.
items and non-stick pans.
6
to increase or