Care And Cleaning; What To Do If - Electrolux ESF 63012 User Manual

12 electrolux
Programme
Rinse
The water pressure and temperature,
the variations of the mains supply and

CARE AND CLEANING

To remove and clean the filters
Dirty filters decrease the washing results.
The appliance has three filters:
1. coarse filter (A)
2. microfilter (B)
3. flat filter (C)
A A
B B
C C
1. To unlock the filter system, turn the
handle on the microfilter (B) approxi-
mately 1/4 counterclockwise.
2. Remove the filter system.
3. Hold the coarse filter (A) by the handle
with the hole.
4. Remove the coarse filter (A) from the
microfilter (B).

WHAT TO DO IF...

The appliance does not start or stops dur-
ing operation.
Programme time (mi-
nute)
12
Energy (kWh)
0,1
the quantity of dishes can change the
consumption values.
5. Remove the flat filter (C) from the bot-
tom of the appliance.
6. Clean the filters below running water.
7. Put the flat filter (C) to its initial position.
Make sure that it assembles correctly
under the two guides (D).
8. Put the coarse filter (A) in the microfilter
(B) and push the filters together.
9. Put the filter system in position.
10. To lock the filter system, turn the han-
dle on the microfilter (B) clockwise until
it locks in position.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance
and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive
cleaning pads or solvents (acetone).
Water (litre)
5
D