3. Grasp the drawer gently and pull until it is fully open.
4. Lay the disc, label side up, in the drawer.
Be careful not to touch the lens or the area around it. Doing so could cause
the drive to malfunction.
5. Press gently at the centre of the disc until you feel it click into place. The
disc should lie below the top of the spindle, flush with its base.
6. Push the centre of the drawer to close it. Press gently until it locks in
place.
User's Manual
Manual release with the eject hole
Pulling the drawer open
Inserting a disc
Operating Basics
4-21