Working Environment - Toshiba PSPB0U-00W008 User Manual

User manual
Table of Contents

Advertisement

Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord indicated in this manual.
Replace only with the same or equivalent type battery recommended by
the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
Use only the battery pack that came with the computer or an optional
battery pack. Use of the wrong battery could damage your computer.
TOSHIBA assumes no liability for any damage in such case.
EU Declaration of Conformity
This product is carrying the CE-Mark in accordance with the related
European Directives. Responsible for CE-Marking is TOSHIBA Europe
GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
The complete and official EU Declaration of Conformity can be found on
TOSHIBA's web site
CE compliance
This product is labelled with the CE Mark in accordance with the related
European Directives, notably Electromagnetic Compatibility Directive
89/336/EEC for the notebook and the electronic accessories including the
supplied power adapter, the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC in case of implemented
telecommunication accessories and the Low Voltage Directive 73/23/EEC
for the supplied power adapter.
This product and the original options are designed to observe the related
EMC (Electromagnetic Compatibility) and safety standards. However,
TOSHIBA cannot guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected or
implemented. In this case the persons who have connected / implemented
those options / cables have to provide assurance that the system (PC plus
options / cables) still fulfils the required standards. To avoid general EMC
problems, the following guidance should be noted:
Only CE marked options should be connected / implemented
Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called "Residential, commercial and
light industry environments".
User's Manual
http://epps.toshiba-teg.com
on the Internet.
P200
v

Advertisement

Table of Contents
loading

This manual is also suitable for:

P200 series

Table of Contents