Electronic Timer - AEG COMPETENCE D5701-5 Installation And Operating Instructions Manual

ELECTRONIC TIMER

KEY
A COOK TIME INDICATOR NEON
B SPEEDCOOK INDICATOR NEON
C END TIME INDCATOR NEON
D COUNTDOWN INDICATOR NEON
E TEMPERATURE INDICATOR NEON
F TIME INDICATOR NEON
G TIME SELECTOR BUTTON
H TIME/TEMPERATURE BUTTON
I SPEEDCOOK BUTTON
NOTE:
The time of day must be set before the main oven
will operate manually.
1. HOW TO SET THE TIME OF DAY
The oven has a 24 hour clock.
When the electricity supply is first switched ON, the
display will show 12.00 and the 'Time' indicator neon
( ) will flash as Fig. 1.
To set the correct time turn the main oven
increase/decrease selector (
time on the 24 hour clock is reached, e.g. 10.00am
as Fig.2. The 'Time' indicator neon (
for 5 seconds and then go out.
Note: The main oven increase/decrease selector
will operate slowly at first, and then more rapidly.
2. HOW TO SET THE COUNTDOWN
The 'Countdown' gives an audible reminder at the
end of any period of cooking. This cooking period
may be up to 99 mins. It is not part of the automatic
control.
To set, press the Time Selector button (
'Countdown' indicator neon (
display reads 0.00 as Fig.3.
To set the correct time duration turn the main oven
increase/decrease selector (
indicates the interval to be timed, e.g. 20 mins as Fig.
4.
NOTE: This must be completed within 5 seconds
of first pressing the Time Selector button.
To view the remaining time period, press the time
selector button until the 'Countdown' neon flashes.
When 90% of the time set has elapsed an audible
signal sounds. The 'Countdown'
intermittently for up to 2 minutes at the end of the
timed period. The sound can be stopped by pressing
any button.
+/-
) until the correct
) will flash
) until the
) is illuminated the
+/-
) until the display
will sound
8
C
1 2 . 0 0
B
A
I H
1 2 . 0 0
Fig.1
1 0 . 0 0
Fig.2
0 . 0 0
Fig.3
2 0 . 0 0
Fig.4
D
E
F
G