Starting A Wash Cycle - Baumatic BFD62W Instruction Manual

BAUMATIC BFD62W dishwasher user manual

STARTING A WASH CYCLE

1
4 5 6
1) MAKE SURE THAT THE PLUG OF THE APPLIANCE IS INSERTED INTO THE WALL
SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3) LOAD THE DISHWASHER (SEE THE SECTION ENTITLED 'LOADING YOUR
DISHWASHER').
4) POUR IN DETERGENT (SEE THE SECTION ENTITLED 'SALT, DETERGENT & RINSE
AID').
5) ENSURE THE DOOR IS CLOSED (IT WILL MAKE A 'CLICKING' SOUND).
6) TURN THE KNOB LOCATED ON THE RIGHT OF THE CONTROL PANEL CLOCKWISE
UNTIL IT POINTS TO THE SYMBOL FOR THE CYCLE SETTING YOU WANT (SEE
THE 'WASH CYCLE TABLE' ON PAGE 13).
7) PRESS THE ON/OFF BUTTON – THE ON/OFF LIGHT WILL TURN ON. AT THIS
POINT, THE WASH CYCLE WILL BEGIN.
Approximate Timing of Wash Cycles
Intensive Normal
120
(strong)
mins.
2 3
7
Economy
114 93
mins. mins.
12
STOP
STOP
STOP
8
Rinse Glass
80 53
mins. mins.
12
Rapid Soap
30 7
mins. mins.