772/773
Calibration Manual
Symbols
Table 1 refers to the symbols that are on the Meter or in this manual.
-
W
X
T
M
B
P
F
~
;
)
Specifications
Electrical Specifications
DC Current Measurement
With Jaw
Ranges ...................................... 0-20.99 mA; 21-100 mA
Resolution.................................. 0.01 mA; 0.1 mA
Accuracy.................................... 0.2 % + 5 counts; 1 % + 5 counts
In Circuit
Range ........................................ 0-24 mA
Resolution.................................. 0.01 mA
Accuracy.................................... 0.2 % + 2 counts
Current Source
Range ........................................ 0-24 mA
Resolution.................................. 0.01 mA
Accuracy.................................... 0.2 % + 2 counts
mA Drive.................................... 24 mA into 1000
Current Simulate
Range ........................................ 0-24 mA
Resolution.................................. 0.01 mA
Accuracy.................................... 0.2 % + 2 counts
Maximum Voltage ...................... 50 V
DC Voltage Measurement (773)
Range ........................................ 0-30 V
Resolution.................................. 0.01 V
Accuracy.................................... 0.2 % + 2 counts
4
Do not apply around, or remove from HAZARDOUS LIVE conductors.
Dangerous. Important data. See Users Manual.
Risk of Electrical Shock.
Equipment protected by double or reinforced insulation.
Battery
Low Battery
Confirms with relevant European Union directives.
DC (Direct Current)
Do not dispose of this the product as unsorted municipal waste. Go to Fluke's web site for
recycling data.
Conforms to relevant Australian standards.
Conforms to relevant Canadian and US standards.
Table 1. Symbols