Installer/Configuration Menu - Emerson 1F86-0471 Instructions Manual

INSTALLER/CONFIGURATION MENU

With thermostat in Heat, Cool or Auto, in normal operation, press the Menu button for at least 5 seconds. The display will
show item #1 in the table below. Press Menu to advance to the next menu item. Press
Shaded items are not available on 1F86.
MENU
PRESS
HP SS BUTTON
REF
1 1 MENU
2 2 1 MENU
MENU Cool Saving CS (OFF)
3 3 2
MENU
4 4 3 MENU
5 4 MENU
6 5 MENU
7 5 MENU
8 6 6 MENU
9 7 7 MENU
10 8 8 MENU
11 9 9 MENU
12 10 10 MENU
MENU
13 11 11
MENU Change Filter 200 h
14 12 12 RUN
1) Select Reversing Valve Output (SS/HP switch must be set
at HP, omitted if SS/HP switch is SS Position) – The O/B
option is factory set at "O" position. This will accommodate
the majority of heat pump applications, which require the
changeover relay to be energized in COOL. If the thermo-
stat you are replacing or the heat pump being installed
with this thermostat requires a "B" terminal, to energize the
changeover relay in HEAT, the O/B option should be set at
"B" position.
2) Program Options 1F80 only – This control can be confi gured
for 5/2 day or 5/1/1 day programming or non-programming
mode. The default setting is P2, indicating 5/2 day program-
ming. The programs per week can be toggled to P3 or P0
by pressing the or
non-programmable will eliminate the need for EMR, and
that step in the menu will be skipped.
3) Select Cool Savings™ and value – Selects the Cool
Savings feature On or OFF. If selected On, press MENU
to select the amount of adjustment for the feature in Cool
mode with 1 (1°) being the least amount of adjustment and
6 (6°) being the most amount of adjustment. Default value
is 3 (3°). In normal operation "Saving" will appear under
"Fan".
4
INSTALLER/CONFIGURATION MENU
DISPLAYED
Press
(FACTORY DEFAULT)
select from listed options
On (Cool O)
P (2)
Cool Saving CS On
CS (3)
E (On)
CR Heat
(ME)
CR Cool
(FA)
CR Heat Pump
(FA)
CL (OFF)
Heat Off with Fan icon,
Auto Heat
Heat Off without Fan
Cool Off
L (On)
1 HI, 2 HI, 3HI, 4 HI,
0 HI
1 LO, 2 LO, 3 LO, 4 LO
F
Change Filter (OFF) Change Filter On
25 h to 1975 h in
25-hour increment
keys. A selection of 0 Days for
or to
Reversing Valve Output (SS/HP switch
Heat b On
must be in the Heat Pump HP position)
P 3, P 0
(For programmable thermostat only)
6, 5, 4, 2, 1 Selects Cool Savings value 1 (low) to 6 (high)
Selects Energy Management Recovery (EMR)
E OFF
Adjustable Anticipation (Heat) (only when
FA, SL
Adjustable Anticipation (Cool) (only when
SL
Adjustable Anticipation (Heat Pump)
SL
(only when SS/HP switch is at the HP position)
CL On
Heat Cool Off,
icon, Cool Off,
Auto Off
L OFF
Adjustable Ambient Temperature Display
C Selects Fahrenheit/Celsius Temperature Display
When on, selects time in 25 hour increments
Cool Savings is an optional energy saving feature that can
reduce your cooling costs. It is based on the principal that
lower indoor humidity makes a slightly higher temperature
feel more comfortable. Cool Savings operates during periods
of high demand which normally occur on the hottest summer
days when the cooling system may run for hours to reach
the thermostat setting. Long cooling run times also lower the
indoor humidity. Cool Savings very slowly adjusts the setpoint
temperature to make the setpoint closer to the displayed
temperature, to a maximum number of degrees selected.
Adjusting the setpoint temperature over a long cooling run
time allows the system to reach your set temperature and
turn off. The room temperature will actually be higher than
the thermostat displays, but the reduction in humidity will
allow comfort at the slightly higher temperature. When Cool
Savings is making adjustments, "Save" will show next to the
setpoint temperature and the room temperature may vary
within the adjustment range selected.
If this feature is selected OFF, no change will occur when
the cooling system is continually running during periods of
high demand.
or to change an item option.
COMMENTS
Selectable Programs Per Week
Select Cool Savings on or off
on or off
SS/HP switch is at the SS position)
SS/HP switch is at the SS position)
Compressor Lockout Time
System Mode Confi guration
with Automatic Changeover
Selects Display Light on or off
Selects Filter Change-out Indicator
25-hour increment
Returns to Normal Operation