Checking Jumper Settings; Jumper Settings - ECS MCP61M-M3 Manual

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.

Jumper Settings

Jumper Type Description
CLR_CMOS 3-pin CLEAR CMOS
Rear USB/PS2
3-pin
USBPWR_R
Power Select
Jumper
Front Panel
USBPWR_F 3-pin
USB Power
Select Jumper
To avoid the system instability after clearing CMOS, we recommend
1.
users to enter the main BIOS setting page to "Load Optimized Defaults"
and then "Save & Exit Setup".
2. Make sure the power supply provides enough VCC5_DUAL voltage
before selecting the VCC5_DUAL function.
3. It is required that users place the USBPWR_F & USBPWR_R cap onto
2-3 pin rather than 1-2 pin as default if you want to wake up the
computer by USB/PS2 KB/Mouse.
Installing the Motherboard
Setting (default)
1-2: NORMAL
2-3: CLEAR
1
Before clearing the
CLR_CMOS
CMOS, make sure to
turn the system off.
1
1-2: VCC5
2-3: VCC5_DUAL
USBPWR_R
1
1-2: VCC5
2-3: VCC5_DUAL
USBPWR_F
9