Pci/Pnp Configurations - ECS A740GM-M Manual

PCI / PnP Configuration
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Allocate IRQ to PCI VGA
Init Display First
: Move
F1:General Help
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
Yes
PCI
Enter : Select +/-/: Value F10: Save
F9: Optimized Defaults
Using BIOS
Help Item
YES: Assigns IRQ to
PCI VGA card if card
requests IRQ.
NO: Does not assign
IRQ to PCI VGA card
even if card requests
an IRQ.
ESC: Exit
37