Management And Configuration; Using A Web Browser - Axis 540 User Manual

Section 2
Configuration
Overview

Using a Web browser

User
AXIS 540+/AXIS 560

Management and Configuration

The management and configuration tools that are supported by the Axis
Network Print Server allow you to:
• Change the print server parameters, i.e. editing the config file
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the Axis Network Print Server
The method you should use to manage and configure your Axis Network Print
Server depends on the operating system protocols of your network. The table
below displays which method to use for each supported environment.
Operating System Protocols
IBM Host
(AS/400, IBM Mainframe)
TCP/IP
(AS/400, IBM Mainframe, UNIX,
Windows
IPX/SPX
(NetWare)
NetBIOS/NetBEUI
Windows
AppleTalk
Once you have established the Axis Network Print Server in the TCP/IP
environment, as described in Assign an IP Address to the Print Server, on page
13, you are free to access the Axis Network Print Server Web pages from any
standard Web browser.
The Web interface of the Axis Network Print Server is divided into two modes of
operation, User mode and Admin mode:
In User mode, you have no rights to change any parameter settings. However, if
you have access rights to the Admin mode, you can change some of the basic
parameters from User mode via the Configuration Wizard. This mode is
intended for regular users who are only interested in using the print server's
interface for checking print jobs or viewing printer properties. If you want to
change any other of the print server's settings, you must enter the Admin mode.
Management and Configuration
Configuration/Management methods
From an IBM Host - See page 94
Web Browser - See page 79
AXIS ThinWizard - See page 83
FTP - See page 85
Telnet - See page 87
SNMP - See page 90
Novell Utilities - See page 93
Web Browser - See page 79
Web browser - See page 79
Mac-FTP - See page 85
79