Hiding The Sequence And Properties Panels Automatically - Brother Pacesetter BES Lettering Instruction Manual

24 Pacesetter BES Lettering
Instruction Manual
4 Do one of the following steps:
To increase the zoom, continue clicking and dragging the
flexible box.
From the Zoom toolbar, click on the down arrow under
the Zoom icon, and use the Zoom tool settings to zoom
back out.
Additional options on the Zoom Toolbar:
When you click on the down arrow underneath the Zoom Tool,
you will see an option menu. You can choose from any of the
following options on this menu:
• Zoom In to make your design larger.
• Zoom Out to make your design smaller.
• To Fit to make the whole design the size of the design
window.
• To Selection to zoom to the size of the currently selected
embroidery segment, or set of embroidery segments if more
than one is selected.
• 1:1 to see the design at the actual size
Hiding the Sequence and Properties
Panels Automatically
To increase the amount of space for your design window, you
can set the Sequence and Properties panels to the Auto hide
mode. When Auto hide is on, the panel will only be visible while
the mouse is over it; as soon as you remove the mouse, the
panel will collapse to a narrow sidebar.
To turn on Auto hide for these panels, click on the small push-
pin icon
Auto hide mode, the small push-pin will be on its side, like this:
. Now, whenever you move the mouse to another part of the
screen, the panel will be hidden.
To turn Auto hide off, click on the
at the top-right of the panel. When the panel is in
icon again.