The View Tab - Brother Pacesetter BES Lettering Instruction Manual

16 Pacesetter BES Lettering
Instruction Manual
Tool
Vertical Center: Takes all selected objects and centers them
in the selection box. The objects are moved so that they are
centered top-to-bottom with each other, but they are not
moved left or right.
Center: Centers one or more selected objects proportionally
within the current hoop.
Flip Horizontal: Flips one or more selected objects
horizontally.
Flip Vertical: Flips one or more selected objects vertically.
Rotate Left: Rotates one or more selected objects to the left
by 90 degree increments.
Rotate Right: Rotates one or more selected objects to the
right by 90 degree increments.

The View Tab

The controls on the View tab allow you to change what appears
on your workspace; which panels are displayed, whether or not
commands and stitch points are shown in the design, and so on.
There are three areas found on this tab, Windows, Show/Hide,
and Program Preferences.
Windows
In the windows area, check the box to show the corresponding
window or panel, and uncheck it to hide that window or panel.
• Sequence. Shows/hides the Sequence view.
• Palette. Shows/hides the thread palette.
• Properties. Shows/hides the properties panel.
• Simulator. Shows/hides the sewing simulator.
• Status. Shows/hides the status bar.
What it means