Useful Hints; Viewing Gps Screens; Viewing The Odometer - Alpine NVD-V001 SMART MAP PRO Owner's Manual

Digital information map prog. ver. 1.00
Table of Contents

Advertisement

Viewing GPS screens

GPS satellite information being received is
displayed on the screen. If the error for the
current vehicle's position is too large, check
how many GPS satellites you are receiving.
You can also see the current heading of your
vehicle and its current speed.
Press the MENU button to display
1
the main menu. Select "Inform"
from the main menu, then select
"GPS INFO." and press ENTER.
The GPS information screen is
2
displayed.
For the procedure after this, see "Before
Using The System" on page 12.
Vehicle
direction
a Satellites from which you are
receiving are displayed green
and those from which you are
not receiving are displayed
red. Blue indicates that your
position is being calculated.
a The direction gives the
heading of your vehicle.
Tips
a The speedometer display
shows how fast your vehicle
is travelling.
a SPEED PULSE blinks when
the speedometer signal is
coming in.
Press the POS. button.
3
The system returns to the map screen.

Useful Hints

Speedometer
Viewing odometer
The odometer displays the route distance/time
travelled since the power to the navigation
system was switched on.
Press the MENU button to display
1
the main menu. Select "Inform"
from the main menu, then select
"TRIP INFO." and press ENTER.
A list indicating the distance/time
2
travelled is displayed.
The confirmation message for resetting is
displayed. (See step 3.)
a
d
a Distance/Time
Distance/Time since reset
b RESET
Resets the distance/time.
The confirmation message for resetting is displayed.
Select "Yes" to execute the resetting.
c Total
The distance travelled since this system was
installed.
d Travel record
e Current
The distance travelled since the ignition key was
switched on. When the ignition key is turned off, the
distance travelled will be reset automatically.
f Distance travelled for previous trip
g Distance travelled two trips before
To reset the Trip Meter (Distance/
3
Time), select "RESET" and press
ENTER. Then, select "Yes" from
the "Reset?" menu and press
ENTER.
b
c
e
f
g
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nvd-v001Smart map pro 1.00

Table of Contents