Advertisement
want to use the wireless function to connect the access point (AP), or connect
with other stations in the wireless range instead, please set up ASRock WiFi-802.11g
module in station mode. There are two choices provided in station mode:
Infrastructure mode and Ad-hoc mode. Please read below introduction for the
differences of these two modes.
B-1. Infrastructure Mode
If you have a present access point (AP) in your wireless network environment for this
station to join, you can set up ASRock WiFi-802.11g module in Infrastructure mode.
In this mode, ASRock WiFi-802.11g module acts as a wireless adapter. In other words,
it is centered on an AP that provides Internet access and LAN communication for the
wireless stations, such as PC, notebook and other devices.
ADSL or Cable
Modem (if any)
Internet
Station 2
ASRock MB With
WiFi-802.11g Module
B-2. Ad-hoc Mode
If you don't have a present access point in your wireless network environment, you
can set up ASRock WiFi-802.11g module in Ad-hoc mode. The wireless network
brings together workstations, PC, notebook and other devices for wireless
communication.
Access Point
Station 1
7
Advertisement
