Advertisement
4. Advanced Setup in ASRock WiFi-802.11g Utility
If you want to set up ASRock WiFi-802.11g for advanced use, please use ASRock
WiFi-802.11g utility and follow below procedures according to the mode you choose.
For general users, it is unnecessary to read below advanced setup in ASRock
WiFi-802.11g utility.
Here we take Windows
the setup procedures are quite similar in different operating systems, please refer to
below procedures when setting up ASRock WiFi-802.11g utility under other
operating systems.
4.1 Setting up the AP Mode
1. Double-click the utility shortcut
icon on your Windows
2. The setup utility contains six buttons - Status, Config, Survey, Statistics, Advanced
and ICS in the left column. The survey button is greyed out in AP mode and the
ICS button is disabled when in the station mode. Click Config button. Click the
AP/Station Mode switch button - To Access Point Mode. Then ASRock
WiFi-802.11g module is switched to AP mode in several seconds.
®
TM
Vista
for example in the following pictures. Since
®
taskbar to open the setup utility.
21
on the desktop or double-click the
Advertisement
