Advertisement
4. The system will automatically generate a SSID for the AP mode. You can rename
the SSID if you want.
5. Select a Network Security level for your AP mode. The configurable options are
OPEN, SHARE WEP and WPA-PSK TKIP. Select an appropriate level and click
Next.
6. If you select SHARE WEP or WPA-PSK TKIP. You need to input a password.
You can choose to configure the password in either ASCII or HEX mode. If you
choose HEX mode, input 10 hex digits for 64-bit encryption, or 26 hex digits for
128-bit encryption. Then click Next to continue.
10
Advertisement
