Table of Contents
Advertisement
3. Basic Operations
3-7 Transmitting
1. Select the desired frequency number.
2. Press and hold the PTT key, speak into
microphone with normal loudness and
tone.
The S meter indicates the unit is in the
transmitting mode.
Speak into the microphone from a
distance of approx. 5cm.
3. Release the PTT key to stop transmitting and to return to the receiving mode.
Reference : A Tone call signal is transmitted by pressing and holding the
3-7-1 Selecting the Transmitter Output Level
Transmission power can be changed to HI/LOW by pressing the L/M keys
while transmitting.
"L"appears on the display when the transmitting power is LOW.
Initial setting is HI.
16
PTT key and pressing the MONI key (There are five tone call
signals that are selectable in the Setting mode).
LOW
HIGH
Advertisement
Table of Contents
