Specifications - Pioneer 434CMX - PDP - 43" Plasma Panel Service Manual

5

1. SPECIFICATIONS

PLASMA DISPLAY
(PDP-434CMX, PDP-43MXE1, PDP-43MXE1-S)
General
Light emission panel .............. "43-inch" AC Plasma Panel
95.2 (W) x 53.6 (H) x 109.3 (diagonal) cm
Number of pixels ............................................... 1024 x 768
Power supply .... AC 100 - 120 V, 50/60 Hz (PDP-434CMX)
Power supply .... AC 100 - 240 V, 50/60 Hz (PDP-43MXE1)
Rated current .....................2.98 A - 24.8 A (PDP-434CMX)
Rated current .....................2.98 A - 1.24 A (PDP-43MXE1)
Standby power consumption ............0.8 W (PDP-434CMX)
Standby power consumption ...............1 W (PDP-43MXE1)
External dimension ...........1070 (W) x 630 (H) x 98 (D) mm
42-1/8 (W) x 24-13/16 (H) x 3-7/8 (D)
(D: Not including handles) in.
(including display stand)
........................................ 1070 (W) x 653 (H) x 300 (D) mm
42-1/8 (W) x 25-23/32 (H) x 11-13/16 (D) in.
Weight .................................................................... 32.5kg
(including display stand) ........................... 33.1 kg (73 lbs.)
Operating temperature range.............................. 0 to 40 °C
Operating Humidity .........................................
Operating atmospheric pressure range .... 760 to 1100 hPa
Input/output
Video
INPUT 1
Input Mini D-sub 15 pin (socket connector)
RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/VS, VD ... TTL level
/positive and negative polarity
/2.2 kΩ
G ON SYNC
... 1 Vp-p/75 Ω/negative sync.
*Compatible with Microsoft's Plug & Play
(VESA DDC1/2B)
Output Mini D-sub 15 pin (socket connector)
75 Ω/with buffer
INPUT 2
Input DVI-D 24-pin connector
Digital RGB signal (DVI compliant
TMDS signal)
*Compatible with Microsoft "Plug & Play"
(VESA DDC 2B)
Audio
Input AUDIO INPUT (for INPUT 1)
Stereo mini jack
L/R ... 500mVrms/more than 10 kΩ
AUDIO INPUT (for INPUT 2)
Stereo mini jack
L/R ... 500mVrms/more than 10 kΩ
Output AUDIO OUTPUT
Stereo mini jack
L/R ... 500mVrms (max)/less than 5 kΩ
SPEAKER
L/R ... 8 – 16 Ω/7W +7W (at 8 Ω)
5
6
Control
RS-232C ...............................D-sub 9 pin (pin connector)
COMBINATION IN/OUT................... Mini DIN 6 pin (x2)
Accessories
Power cord ................................. 1 (PDP-434CMX Only)
(PDP-43MXE1-S) Remote control unit ....................................................... 1
Remote control unit holder ............................................ 1
AA (R6) batteries .......................................................... 2
Cleaning cloth (for screen) ........................................... 1
(PDP-43MXE1-S)
Speed clamps ............................................................... 2
Bead bands .................................................................. 2
Warranty ...................................... 1 (PDP-434CMX Only)
(PDP-43MXE1-S)
Operating Instructions .................................................. 1
Display stands .............................................................. 2
Washers ....................................................................... 2
Hex hole bolts (M8X40) ................................................ 2
Ferrite core ......1 (PDP-43MXE1, PDP-43MXE1-S Only)
Cable tie ...........1 (PDP-43MXE1, PDP-43MXE1-S Only)
Due to improvements, specifications and design are subject to
change without notice.
20 to 80 %
Accessories
PDP-434CMX Only
Power Cord (ADG1215)
Remote Control Unit
(AXD1486)
Dry Cell Battery (R6P, AA)
Binder Assy (AEC1758)
Speed Clamp (×2)
Bead Bands (×2)
PDP-434CMX
6
7
Cleaning Cloth (for wiping front panel)
(AED1208)
Display Stand (×2) (AMR3264)
Remote Control Unit Holder
(AMR3268)
PDP-43MXE1,
PDP-43MXE1-S
Screw Set (AXX1060) Only
Washer (×2)
(WB80FZB)
Hex Hole Bolts (×2)
(SMZ80H400FZB)
7
8
A
B
C
D
E
Ferrite Core
(ATX1039)
Cable Tie
F
7
8