What To Do If - AEG B57415A User Manual

What to do if ...

The oven does not heat up
The oven lighting is not oper-
ating
Pyroluxe is not working ("C1"
appears in the display)
F2 appears in the clock display Door not properly closed or
In the clock display there ap-
pears a fault code that is not
listed above
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
Advice on cookers with metal fronts:
Because of the cooler surface at the front of the cooker, opening the oven
door during (or just after) baking or roasting may cause the glass to
steam up.
Problem
The oven is not switched on
The clock has not been set
The required settings have not
been set
The oven's automatic cut-out
has been triggered.
The fuse in the house's electri-
cal wiring (fuse box) has been
tripped
The oven bulb is faulty
Side rails/oven shelf runners
have not been removed
door lock defective
Fault in the electronics
Possible cause
What to do if ...
Remedy
Switch the oven on
Set the current time on the
clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip re-
peatedly, please call an au-
thorised electrician
Change the oven bulb
Remove side rails/oven shelf
runners
Close door properly;
Turn the appliance off and on
again via the house fuse or the
safety switch in the fuse box;
If displayed again, please con-
tact the Customer Care De-
partment
Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please con-
tact your local Service Force
Centre.
53