Pyrolytic Cleaning - AEG B57415A User Manual

44 Cleaning and care

Pyrolytic cleaning

Warning: The oven gets extremely hot during this process. Young children must
be kept away.
Important! Before carrying out pyrolytic cleaning, all removable parts including
the side rails, must be removed from the oven.
If you use the oven shelf runners that are available as special accessories, these
must be removed before pyrolytic cleaning.
If the side rails or oven shelf runners are still in place, 'C1' appears in the clock
display.
The pyrolytic cleaning process then cannot be started due to a safety cut-out
that protects the side rails/oven shelf runners.
Pyrolytic cleaning
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe
– "3:15" appears in the display,
– Cook time flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
The Light does not work.
When a pre-set temperature is reached, the door is locked.
The bars of the heat indicator light up, until the door is unlocked again.
Changing the length of time for the pyrolytic cleaning
1. Proceed as described in the section "Pyrolytic cleaning".
2. As long as Cook time
using or
" / 2:15" or "3:15"
Cook time
Pyrolytic cleaning then starts.
If Cook time
then perform the setting procedure.
Changing the switch-off time for the pyrolytic cleaning
The switch-off timecan be delayed using the clock function End time
2 minutes of the pyrolytic cleaning starting).
When the different processes for pyrolytic cleaning are set:
P2 - 2:15 = Pyroluxe easy: For a light degree of soiling,
P1 - 3:15 = Pyroluxe intensive: For a high degree of soiling.
is flashing, select the desired length for the process
:
flashes for approx. 5 seconds.
is no longer flashing, press the Select
.
button again and
(within