NETGEAR MBR1516 User Manual page 59

Mobile LTE Broadband 11n Wireless Router MBR1516
3. Click Connection Status to see information about your current connection.
• Mobile Broadband Status.
- Connection Status. The status of the Internet connection.
- Received Signal Quality (in dBm). Modem radio reception. A small, negative
number indicates good signal quality.
- Bytes Transmitted. The number of bytes transmitted in the most recent
connection session.
- Bytes Received. The number of bytes received in the most recent connection
session.
- Tx B/s. The transmission rate.
- Rx B/s. The receiving rate.
- System Uptime. Time elapsed since the last reboot.
- Connection Duration. Length of the current connection.
• Connection Status.
- IP Address. The IP address that is assigned to the router.
- Subnet Mask. The subnet mask that is assigned to the router.
- Default Gateway. The IP address for the default gateway that the router
communicates with.
- DHCP Server. The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected to
the router.
- DNS Server. The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
- Lease Obtained. The date and time when the lease was obtained.
- Lease Expires. The date and time that the lease expires.
To change the polling frequency, enter a time in seconds in the Poll Interval field, and
click Set Interval.
Administration
59