AEG PREFERENCE B 81405 Operating Instructions Manual page 57

Insert the upper door glass
1. Insert the upper glass pane at an angle from above centrally into the
0
retaining profile on the lower edge of the door (1).
2. Lower the glass pane (2) and align it sideways so that the outer edges
of the glass are central on the door frame (3).
3. Reattach the retaining profiles on the left and right so that the recesses
are opposite each other on the left and right on the lower edge of the
door (1).
4. Tighten the right and left cross recess screws again (2). Check that the
retaining profiles are securely fitted!
5. Put the oven door back on its hinges.
The oven may only be used after the door has been completely reas-
1
sembled.
Operating Instructions
57