Setup Before Using; About Bluetooth; Before Using Hands-Free Phone/Audio Function; How To Connect To A Bluetooth Compatible Unit - Alpine KCE-300BT Owner's Manual

Setup Before Using

About Bluetooth

Bluetooth is a short distance wireless technology to connect a
mobile phone or personal computer. This allows you to
enable a hands-free call or transmit data between Bluetooth
compatible units.
• Depending on the Bluetooth version, a Bluetooth compat-
ible unit may not be able to communicate with this adapter.
• Proper function of this adapter with all Bluetooth
compatible units is not guaranteed.
• Depending on the surroundings, Bluetooth wireless
connection may be unstable.
• When you place a call, or perform setup operations, be
sure to stop your car in a safe place.
• For details on the control (selection, enter, cancel) from the
connected unit, refer to the Owner's Manual of the
respective unit.
• Depending on the connected Bluetooth compatible
device(s), the function may differ. Also refer to the Owner's
Manual of the connected device(s).
Before Using Hands-Free Phone/
Audio Function
Before using the hands-free phone/audio function, the
following settings need to be made.
1
Be sure to set "INT MUTE" (in the setup
function of the connected head unit or Digital
Media receiver) to OFF.
• Before making sound interruption on the Bluetooth
compatible unit, make sure that INT MUTE is set to OFF.
(Initial setting on the unit is OFF.)
2
Set "Bluetooth IN" or "Bluetooth" to
ADAPTER*. (Refer to the Owner's Manual of
the connected units.)
3
Turn the ignition key off (ACC OFF) and on
again (ACC ON).
• Before using a hands-free phone, it must be paired with the
adapter. Refer to "Bluetooth SETUP" (pages 4-5).
* Even when "Bluetooth IN" or "Bluetooth" is set to OFF,
set the ignition key from ACC to OFF once, then to ON
again, and remove the adapter, otherwise a malfunction
may result.
How to connect to a Bluetooth
compatible Unit (Pairing)
For details on the control from a Bluetooth compatible unit,
refer to the Owner's Manual of the Bluetooth compatible unit.
1
Set a Bluetooth connection from a Bluetooth
compatible unit.
2
The PIN code ("0000") is displayed on the
unit.
• The PIN code is fixed as "0000."
3
Input the PIN code ("0000") in a Bluetooth
compatible unit.
4
If the adapter is successfully connected to a
Bluetooth compatible unit, a paired device
name and a registered number (No. 1 to 4 or
guest mode) are displayed, and then the unit
returns to normal mode.
• Set "Setting the Search Mode" (page 5) to ON to enable
the KCE-300BT to recognize a mobile phone. For mobile
phone passkey (passcode) input operation, refer to the
mobile's Owner's Manual. Additionally, the mobile phone
can be searched directly from an AV head unit. Refer to
"Registering the Bluetooth Device (AV Head Unit only)"
(page 5).
ALPINE KCE-300BT 68-08564Z70-A (EN)
3
-EN