Memory Test; Software Identification (Sw Id) - Actron OBD II AutoScanner CP9135 Instructions Manual

3.6.4

Memory Test

If the AutoScanner has trouble performing functions, the Memory
Test should be performed.
From the Tool Setup/Test menu,
select the Memory Test option and
press ENTER to begin.
As the memory is tested, its address is displayed on the bottom line.
After the memory test is done, either a "TEST PASS" or "TEST FAIL"
message is displayed.
ROM Test
Testing Addr a500
Press any key to return to the Tool Setup/Test menu.
3.6.5

Software Identification (SW ID)

The Software Identification is needed when contacting customer
support. Note this in the manual for reference.
From the Tool Setup/Test menu, select the SW ID option and press
ENTER. Note this in the manual for reference.
Tool Setup
5)SW ID
Press any key to return to the Tool Setup/Test menu.
Using the Tool
Tool Setup
4)Memory Test
TEST PASS
Press Any Key
SW ID: 47H5
Press Any Key
3-11