Table of Contents
Advertisement
fig. 25
IMPORTANT "General Trip" reset will
also reset the "Trip B" function, where-
as "Trip B" reset will only reset the in-
formation associated with this function.
Every Trip computer screen displays two
options of the active Trip (Trip A or Trip
B); one option is displayed at the top of
the screen, the other one at the bottom
(see fig. 25).
40
In the same screen it is not possible to
have displayed at the same time the
same option at the top and at the bot-
tom of the screen.
Briefly press button TRIP to select the
two Trip computer modes; use button
-
to scroll the options at the top of the
display, use button
A0F0052m
tions at the bottom of the display.
Press briefly button TRIP to go from
Trip A to Trip B.
Start of journey procedure
(reset)
Trip A and Trip B reset are independent.
Reset General Trip
With electronic key into ignition device,
to reset the "General Trip" press and
.
to scroll the op-
keep pressed button TRIP for over 2
seconds.
IMPORTANT Reset can be automat-
ic only in the following cases:
❒ when the "Travel Distance" reach-
es 9999.9 km or the "Travel Time"
reaches 99.59 (99 hours and 59
minutes);
❒ after disconnecting/reconnecting
the battery.
At General Trip reset a warning message
will be displayed.
Advertisement
Table of Contents
