4 Use your TV
Switching on your TV and putting it in
Standby mode
32PFL4208 /
29PFL4508 /
50PFL3708
24PFL4508
* Key on Rear
To Turn the TV On from Standby or Off to Standby
•
Press
(3 raised dots on the Rear panel or Front panel or the
Remote control).
Note
• Energy consumption contributes to air and water pollution. When the AC power cord
is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
Adjusting volume
32PFL4208 /
29PFL4508 /
50PFL3708
24PFL4508
* Key on Rear
To decrease or increase volume
•
Press VOL ◄ / ► (1 raised dot on the Rear panel or Front panel)
or press VOL + / − on the Remote control.
VOL ◄ : Volume Down
VOL ► : Volume Up
To mute or unmute sound
•
Press
on the remote control to mute the sound.
again or VOL + / − to recover the original sound.
•
Press
Switching channels
39PFL3708 /
39PFL4408 /
32PFL3508
* Key on Rear
To select Channels by using CH ▼/▲ or CH + / −
•
To select Channels by using the NUMBER buttons
–
39PFL3708 /
39PFL4408 /
32PFL3508
Press PREV.CH to return to the previously viewed channel.
• To select the non-memorized channels, use the NUMBER buttons.
• No Signal will appear on the TV screen after the subchannel broadcast is over.
• Audio only program message will appear on the TV screen, when you receive only
* 50PFL3708 only
All CONTROL Keys are located on the Rear (lower right) side of the
unit as viewed from the Front.
32PFL4208 /
29PFL4508 /
50PFL3708
24PFL4508
Press CH ▼ (Down) / ▲ (Up - 1 raised dot on the Rear panel or
Front panel) or press CH + / − on the Remote control.
When selecting cable or Analog channel 11.
Note
sound signal.
16
English
39PFL3708 /
39PFL4408 /
32PFL3508