Using The Fingerprint Sensor - Toshiba PSAG8C-02W013 User Manual

A300

Using the fingerprint sensor

This product has a fingerprint utility installed for the purpose of enrolling
and recognizing fingerprints. By enrolling the ID and password to the
fingerprint authentication device, it is no longer necessary to input the
password from the keyboard. Just by swiping the finger against the
fingerprint sensor, the following functions will be enabled:
Logon to Windows and access a security-enabled homepage through
IE (Internet Explorer).
Files and folders can be encrypted/decrypted and third party access to
them prevented.
Disable the password-protected screen-saver when returning from
power-saving (Sleep) mode.
Single-Swipe Sign-On feature.
Authentication of the User Password and Hard Disk Password when
booting up the computer.
To "swipe" refers to the action of reading a fingerprint using the fingerprint
sensor.
How to swipe the finger
Using the following steps when swiping fingers for fingerprint registration or
authentication will help to minimize authentication failures:
1. Align the first joint of the finger to the center of the sensor. Lightly touch
the sensor and swipe finger levelly towards you.
2. While lightly touching the sensor, swipe the finger towards you until the
sensor surface becomes visible.
3. Ensure the center of the fingerprint is on the sensor when swiping the
finger.
4-2
Figure 4-2 Slide the finger over the recognition sensor
User's Manual