JVC KD-R330 Instruction Manual page 11

Menu item
DIMMER SET
BRIGHTNESS
2
SCROLL *
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.
PRO EQ
3, 4
FADER * *
4
BALANCE *
LOUD
VOL ADJUST
L/O MODE
5
SUB.W LPF *
5
SUB.W LEVEL *
HPF
BEEP
TEL MUTING *
1
*
The illumination control lead connection is required. (See "Installation/Connection Manual.") This setting may not work
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to
any other than <DIMMER AUTO>.
2
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
3
*
If you are using a two-speaker system, set the fader level to "00."
4
*
This adjustment will not affect the subwoofer output.
5
* Displayed only when <L/O MODE> is set to <SUB.W>.
6
* This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.
Selectable setting, [Initial: Underlined]
AUTO : Changes the display and button illumination between the Day/Night
adjustments in <BRIGHTNESS> setting when you turn off/on the car headlights. *
ON : Selects the Night adjustments in <BRIGHTNESS> setting for the display and button
illumination. / OFF : Selects the Day adjustments in <BRIGHTNESS> setting for the
display and button illumination.
DAY [ 31 ] / NIGHT [ 15 ] : Selects the display and button illumination brightness level
[00 — 31] for day and night.
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
intervals). / OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the setting.)
See page 10.
R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
level. / OFF : Cancels.
–05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except
"FM"), compared to the FM volume level. The volume level will automatically increase or
decrease when you change the source. Before adjustment, select the source you want to
adjust. ("VOL ADJ FIX" appears on the display if "FM" is selected as the source.)
SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer (through
an external amplifier). / REAR : Selects if the REAR/SW terminals are used for connecting
the speakers (through an external amplifier).
LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than
55 Hz/85 Hz/120 Hz are sent to the subwoofer.
00 — 08 [ 04 ] : Adjusts the subwoofer output level.
ON : Activates the High Pass Filter. Low frequency signals are cut off from the front/rear
speakers. / OFF : Deactivates (all signals are sent to the front/rear speakers).
ON / OFF : Activates or deactivates the keypress tone.
6
ON : Mutes the sounds while using the cellular phone (not connected through
KS-BTA100). / OFF : Cancels.
1
/
Continued...
ENGLISH 11