Creating A List Of Administrator Accounts; To Create A List Of Administrator Accounts - HP P4535A - Web Cache Server Appliance Administrator's Manual

Chapter 11
3. Edit the following variables:
Variable
proxy.config.admin.basic_auth
proxy.config.admin.admin_password
4. Save and close the
5. Run the command
6. Access Traffic Manager from your browser. When prompted for the user name and password, enter the
administrator ID and leave the password entry blank.
Because you have already cleared the password in the
to log on as the administrator.
7. On Traffic Manager Configure tab, click the Security button.
8. In the Control Access to the Traffic Server Manager section, click the Change administrator's
password link.
9. Leave the Old Password field empty. Enter the new password in the New Password field, then re-enter
the new password in the New Password (again) field.
10. Click the Make This change button.

Creating a list of administrator accounts

If a single administrator ID and password for Traffic Manager is not sufficient security for your needs, you
can create a list of administrator accounts that define who has access to Traffic Manager and which activities
they can perform.
You can use administrator accounts in addition to using the administrator ID and password.

To create a list of administrator accounts:

1. Access Traffic Manager from your browser (refer to
2. On the Configure tab, click the Security button.
The Security page opens displaying the Control Access to the Traffic Server Manager section at the top
of the page.
3. Click the Additional Users link to open the Additional Users page.
4. Click the Add Entry button to open the Add Entry dialog box (shown below).
Description
Set this variable to 1 to enable authentication.
Change the value of this variable to NULL to leave the
password blank.
file.
records.config
to apply the configuration changes.
traffic_line -x
file, you do not need a password
records.config
Accessing Traffic Manager‚ on page
Security Options
8).
85